Yamaha M7CL M7cl V3 Owner's Manual - Page 110
Inserting an external device into a channel, INSERT IN HA field M7CL-48ES only
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Inserting an external device into a channel Inserting an external device into a channel If desired, you can insert an effect processor or other external device into the signal path of an INPUT, MIX, MATRIX, STEREO, or MONO channel. When doing so, the type of input/output port used for the insertion and the location of the insertion in/out can be specified individually for each channel. 1 As desired, connect your external equipment to the I/O card(s) in slots 1-3. If you are using the M7CL-48ES, you can also connect your external equipment to the OMNI IN/OUT jacks. DIGITAL OUT DIGITAL IN digital I/O card DIGITAL OUT DIGITAL IN effect processor M7CL HINT • If you install a digital I/O card in a slot and digitally connect an external device, you'll need to synchronize the word clock between the M7CL and your external device (→ p. 230). 2 Use the navigation keys to access the OVERVIEW screen for the channel to which you want to assign an input source. 1 Icon / Channel number / Channel name This indicates the icon selected for that channel, the channel number, and the channel name. B INSERT field Here you can make insert-related settings. Press one of three fields to choose PRE EQ (immediately before the attenuator), PRE FADER (immediately before the fader) or POST ON (immediately after the [ON] key) as the insert-out/in position. C INSERT IN HA field (M7CL-48ES only) This field appears if the OMNI IN jack is used as insert-in, and enables you to turn on or off the phantom power to the OMNI IN jack and to set the HA gain. D INSERT OUT popup button This indicates the output port that is selected as the insert-out for this channel. Press this button to open a popup window where you can select the output port. E INSERT IN popup button This indicates the input port that is selected as the insert-in for this channel. Press this button to open a popup window where you can select the input port. F INSERT ON/OFF button This button switches the insert on/off. If this button is off, the insert-signal path is bypassed. 3 Press the INSERT/DIRECT OUT field to access the INSERT/DIRECT OUT popup window. In the INSERT/DIRECT OUT popup window you can view or change the type of input/output port used for insertion and the location at which insertion will occur. There are two variations of this popup window; one-channel and eight channel. These windows include the following items. [INSERT/DIRECT OUT popup window (8ch)] 1 2 3 4 5 [INSERT/DIRECT OUT popup window (1ch)] 1 2 3 456 110 M7CL Owner's Manual M7CL-48ES 1 Channel number / Icon This shows the channel number and the icon that is selected for that channel. You can press this field to change the selected channel. B Channel name This indicates the name assigned to that channel. C INSERT OUT popup button This indicates the output port that is selected as the insert-out for this channel. Press this button to open a popup window where you can select the output port. The currently specified insert-out/in position is shown below the button.