Yamaha M7CL M7cl V3 Owner's Manual - Page 177
Using the 31BandGEQ, FADER ASSIGN field
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
Graphic EQ operations Using the 31BandGEQ You will use the Centralogic section's faders 1-8 and [ON] keys to control the 31BandGEQ. 1 Refer to steps 1-6 in the "Virtual rack operations" (→ p. 172) to mount a 31BandGEQ in a rack and set its input source and output destination. The rack in which the 31BandGEQ is mounted will show the approximate settings and input/output levels. 1 2 1 Rack graphic display area B Input/output meters This indicates the level of the signals before and after the 31BandGEQ. 2 In the GEQ/EFFECT field, press the rack in which you mounted the 31BandGEQ. The GEQ popup window will appear. In the GEQ popup window you can use the tabs to switch between the eight racks. 56 7 8 9 1 2 3 4 1 EQ graph This indicates the approximate response of the current 31BandGEQ settings. B Faders These faders indicate the amount of boost/cut for each band of the 31BandGEQ. The actual values are shown in the numerical boxes below. C FADER ASSIGN field In this field you can select the group of bands that will be controlled by the Centralogic section's faders. D Rack select tabs These tabs switch between racks 1-8. For a rack in which a Flex15GEQ is mounted, the tabs will be split as xA and xB (x is the rack number). E INPUT button This button displays the OUTPUT CH SELECT popup window, where you can select the input source of the rack. F OUTPUT button This button displays the INPUT CH SELECT popup window, where you can select the output destination of the rack. G GEQ LINK button This button links adjacent GEQ units. In the case of a 31BandGEQ, the GEQ units in adjacent odd-numbered/even-numbered racks will be linked. NOTE • The GEQ LINK button is shown only if linking is possible. H FLAT button This returns all bands of the currently selected GEQ to 0 dB. I GEQ ON/OFF button Switches the currently selected GEQ on/off. 3 Press the GEQ ON/OFF button to turn on the 31BandGEQ. 4 Press one of the buttons in the FADER ASSIGN field to select the group of bands you will control using the Centralogic section's faders. The buttons of the FADER ASSIGN field correspond to the following groups of bands. Button name 20-100 button 63-315 button 200-1k button 630-3.15k button 2k-10k button 4k-20k button Bands The eight bands 20.0 Hz-100 Hz The eight bands 63.0 Hz-315 Hz The eight bands 200 Hz-1.00 kHz The eight bands 630 Hz-3.15 kHz The eight bands 2.00 kHz-10.0 kHz The eight bands 4.00 kHz-20.0 kHz When you press one of these buttons, the faders for the bands selected on the screen will turn white, and the numbers of the corresponding faders in the Centralogic section will be displayed. HINT • The above operation is possible even if the Centralogic section is locked. When you turn off the button in the FADER ASSIGN field, it will return to the locked state. 16 Graphic EQ and effects 5 Operate the faders of the Centralogic section. The corresponding frequency region will be boosted or cut. HINT • When a fader of the Centralogic section is in the center (flat) position, the corresponding [ON] key will go dark. This indicates that the corresponding band is not being modified. If you raise or lower the fader even lightly, the [ON] key will light, indicating that this band is being modified. If you press a lit [ON] key to make it go dark, the corresponding band will immediately return to the flat state. M7CL Owner's Manual 177