Yamaha M7CL M7cl V3 Owner's Manual - Page 113
Press the DIRECT OUT ON/OFF button to, DIRECT OUT ON/OFF button
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Directly outputting an INPUT channel [INSERT/DIRECT OUT popup window (8ch)] 1 2 3 4 5 1 Channel number / Icon This shows the channel number and the icon that is selected for that channel. You can press this field to change the selected channel. B Channel name This indicates the name assigned to that channel. C DIRECT OUT ON/OFF button This button switches the direct output on/off. If this button is off, the direct output for that channel will be disabled. The currently selected direct output position is shown above the button. D DIRECT OUT popup button This indicates the output port used for direct output. Press this button to open a popup window where you can select the output port. E DIRECT OUT LEVEL knob Adjusts the level of the signal that is directly output. 4 Access either the one-channel or the eightchannel INSERT/DIRECT OUT popup window, and press the DIRECT OUT popup button. The OUTPUT PORT SELECT popup window will appear, allowing you to select the output port used for direct output. The window includes the following items. 1 2 1 Output port select tabs These tabs select the output ports shown in the window. Each tab corresponds to the following output ports. • ES (M7CL-48ES) ........... EtherSound output channels 1-24 will be displayed. • OMNI OMNI OUT jacks 1-16 (1-8 on the M7CL-48ES) will be displayed. • SLOT 1-SLOT 3 Output channels 1-16 of slots 1-3 will be displayed. B Output port select buttons These buttons assign the output port used for direct output of the currently selected INPUT channel. 5 Use the output port select tabs and the output port select buttons to specify the output port that will be used for direct output, and press the CLOSE button. You will return to the INSERT/DIRECT OUT popup window. 6 Press the DIRECT OUT ON/OFF button to 9 turn it ON. In this state, direct output is enabled. Adjust the input level of your external device as necessary. HINT • With the factory settings, all are turned off. Input/output patching 7 If you want to change the position of the direct output, access the one-channel INSERT/DIRECT OUT popup button, and press one of the three DIRECT OUT fields. The DIRECT OUT field you pressed will be enabled. 8 If you want to adjust the level of the direct output, access either the one-channel or the eight-channel INSERT/DIRECT OUT popup window, and operate the DIRECT OUT LEVEL knob. 9 When you have finished making all settings, click the "×" symbol located in the upper right to close the window. You will return to the OVERVIEW screen. 10 As desired, make direct output settings for other channels as well. M7CL Owner's Manual 113