Yamaha M7CL M7cl V3 Owner's Manual - Page 45
Ring connection, Press the EXT-ES HA tab
![]() |
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Connecting SB168-ES units to the M7CL-48ES using the STAGE BOX SETUP function ■ Ring connection 1 Connect the EtherSound [OUT] connector on the M7CL-48ES to the [IN] connector of the first SB168-ES unit, daisy chain subsequent units, then connect the [OUT] connector of the last SB168-ES unit to the [IN] connector on the M7CL-48ES as shown in the diagram to complete a ring connection. EtherSound IN OUT IN OUT IN OUT IN OUT 4 SB168-ES (ID #1) SB168-ES (ID #2) SB168-ES (ID #3) Connections and setup M7CL-48ES 2 Set the dip switches on the SB168-ES units as shown in the table below. Number of SB168-ES units ID #1 ID #2 ID #3 Three 1&5 2&5 3&6 Two 1&5 2&6 - One 1&6 - - 3 Turn on the power to the M7CL-48ES and the SB168-ES units. 4 In the function access area on the right part of the screen, press the RACK button (1) to access the VIRTUAL RACK window. 2 1 5 Press the EXT-ES HA tab (2) to display the EXT-ES HA field. 6 Press the AUTO CONFIGURE button below the EXT-ES HA field. The AUTO CONFIGURE button is set to off and its indicator turns off. 7 Press the RING button to the right of the AUTO CONFIGURE button. The connection setting is configured for a ring connection. 8 Press the AUTO CONFIGURE button. A dialog box confirming the change is displayed. 9 Press the OK button. The AUTO CONFIGURE button and its indicator will turn on. 10 If M7CL-48ES's scene #000 is not selected, recall scene #000. p. 138 M7CL Owner's Manual 45
![](/manual_guide/products/yamaha-m7cl-m7cl-v3-owners-manual-9670c06/45.png)