Yamaha M7CL M7cl V3 Owner's Manual - Page 152

Using the Fade function 5 Use the multifunction encoders corresponding to the FADE TIME knobs to adjust the fade time. The range is 0.0 sec - 60.0 sec. When you've finished making settings, press the CLOSE button to close the FADE TIME popup window. HINT • The fade time you specify here is used for all channels and DCA groups selected in step 4. 6 To enable the Fade function, press the FADING button. The Fade on/off setting is made individually for each scene. HINT • Scenes for which Fade settings are made are shown by a "FADING" indication in the STATUS field of the SCENE LIST window. 7 Recall a scene for which the Fade function is turned on. The faders will begin to move immediately after Recall occurs, and will reach the values of the recalled scene over the course of the specified fade time. NOTE • The Fade function settings can be applied individually even if faders are linked by Channel Link. HINT • By stopping a moving fader while you hold down the corresponding [SEL] key, you can stop the fade operation of the fader at that point. • If you recall the same scene while faders are moving, the faders of all channels and DCA groups will move immediately to their target positions. 152 M7CL Owner's Manual