Yamaha M7CL M7cl V3 Owner's Manual - Page 90
About the SELECTED CHANNEL VIEW screen
![]() |
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
About the SELECTED CHANNEL VIEW screen About the SELECTED CHANNEL VIEW screen When you press one of the encoders in the SELECTED CHANNEL section, the SELECTED CHANNEL VIEW screen will appear in the touch screen. The SELECTED CHANNEL VIEW screen shows most of the parameters of the channel currently selected by its [SEL] key. This screen lets you check the settings being controlled by the encoders of the SELECTED CHANNEL section. The SELECTED CHANNEL VIEW screen contains the following items. 1 7 23 4 5 6 I J K L 8 M NO 1 TO MIX/TO MATRIX field • When an input channel is selected ...........Here you can switch the on/off status of the signals sent from that channel to each MIX bus and MATRIX bus, and view the send levels. By switching between the TO MIX and TO MATRIX buttons you can switch the buses that are shown in the SELECTED CHANNEL VIEW screen or OVERVIEW screen. • When a MIX, STEREO, or MONO channel is selected ...........Here you can switch the on/off status of the signals sent from that channel to each MATRIX bus, and view the send levels. • When a MATRIX channel is selected ...........Here you can switch the on/off status of the signals sent from each channel to that MATRIX bus, and view the send levels. B HA field (input channels only) This field shows the input port patched to the input channel, the head amp gain, the phantom power on/off status, the phase setting, and the input level OVER indicator. C PATCH field (output channels only) For output channels, the PATCH field is shown in the (2) area. This field indicates the output port that is patched to the output channel. If two or more output ports are patched, only will be shown as a representative. D TO ST PAN/BALANCE field • When an INPUT channel or monaural MIX channel is selected This functions as an on/off switch for the signal sent from that channel to the STEREO/MONO bus. The panning of the signal sent to the STEREO bus is also shown. • When a ST IN channel or a stereo MIX channel is selected This functions as an on/off switch for the signal sent from that channel to the STEREO/MONO bus. This also shows the balance of the left/right signals sent from that channel to the STEREO bus. • When a stereo MATRIX channel is selected This shows the balance of the left/right signals sent from the MATRIX channel. • When a STEREO channel is selected This shows the balance of the left/right signals sent from the STEREO channel. E DYNAMICS 1 field F DYNAMICS 2 field (input channels only) This shows the Dynamics 1/2 parameters. This also accesses a popup window where you can edit detailed dynamics parameters that cannot be edited in the SELECTED CHANNEL section. G HPF field (input channels only) These controls switch the HPF (high-pass filter) on/off, and adjust its cutoff frequency. H EQ field Here you can switch the four-band EQ on/off, and view its parameters. 90 M7CL Owner's Manual
![](/manual_guide/products/yamaha-m7cl-m7cl-v3-owners-manual-9670c06/90.png)