Yamaha M7CL M7cl V3 Owner's Manual - Page 95
INPUT, MIX, Making direct output settings
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Operations in the SELECTED CHANNEL section B OVER indicator This will light when the post-EQ signal reaches the overload point. C EQ ON/OFF button Switches the EQ on/off. To edit the EQ, switch the EQ ON/OFF button on, and use the EQ [Q], EQ [FREQUENCY], and EQ [GAIN] knobs of the SELECTED CHANNEL section to adjust the cue, center frequency, and the amount of boost/cut. If you want to edit more detailed parameters, or recall existing settings from the library, press any EQ or HPF knob or a location within the EQ graph field to access the EQ popup window. (For details on the popup window → p. 115). NOTE • The type of the LOW band EQ or HIGH band EQ cannot be switched in the SELECTED CHANNEL VIEW screen. If necessary, you can access the EQ popup window and switch the EQ type. • If the HIGH band EQ type is already set to Low Pass Filter, the HIGH band Q knob will not be displayed, and the GAIN knob will function as an on/off switch for the Low Pass Filter. • Press the EQ [Q] and EQ [GAIN] encoders simultaneously to reset the GAIN setting for each band to the default value (0.0dB). ● Making insert settings (INPUT, MIX, MATRIX, STEREO, and MONO channels only) Use the INSERT field to make insert-related settings in the SELECTED CHANNEL VIEW screen. This field includes the following items. 2 13 1 INSERT popup button When you press this button, the INSERT/DIRECT OUT popup window will appear, allowing you to make settings for insert and direct output. B IN indicator This indicates the presence or absence of a signal at the input port patched to INSERT IN. C INSERT ON/OFF button Switches the insert on/off. To make insert settings in the SELECTED CHANNEL VIEW screen, press the INSERT popup button to access the INSERT/DIRECT OUT popup window (1 ch), and assign an output port and input port to the insert-out and insert-in (→ p. 112). When you've assigned the ports, press the INSERT ON/OFF button to turn it on. ● Making direct output settings (INPUT channels only) Use the DIRECT OUT field to make direct-output related settings for an input channel in the SELECTED CHANNEL VIEW screen. This field includes the following items. 2 Operations in the SELECTED CHANNEL section 13 1 DIRECT OUT popup button When you press this button, the INSERT/DIRECT OUT popup window will appear, allowing you to make settings for insert and direct output. B DIRECT OUT LEVEL indicator This indicates the currently specified DIRECT OUT LEVEL value. 7 C DIRECT OUT ON/OFF button Turns the direct output on/off. To make direct out settings in the SELECTED CHANNEL VIEW screen, press the DIRECT OUT popup button to access the INSERT/DIRECT OUT popup window (1 ch), and assign an output port to the direct out (→ p. 112). Press the DIRECT OUT ON/OFF button to turn it on, and use the DIRECT OUT LEVEL knob to adjust the output level. ● Setting a channel to Recall Safe Use the RECALL SAFE field to specify Recall Safe for the channel that is currently selected in the SELECTED CHANNEL VIEW screen. This field includes the following items. 2 13 1 RECALL SAFE popup button This opens the RECALL SAFE MODE popup window, where you can make settings related to Recall Safe. B PARTIAL indicator This will light if only some of the parameters of that channel are set to Recall Safe. C RECALL SAFE ON/OFF button Switches the Recall Safe status on/off for the channel. To set the channel to Recall Safe mode, press the RECALL SAFE ON/OFF button to turn it on. If you want to specify Recall Safe only for specific parameters, press the RECALL SAFE popup window to open the RECALL SAFE MODE popup window, and then select the parameters for which you want to specify Recall Safe. (For details on the popup window → p. 148). M7CL Owner's Manual 95