Yamaha M7CL M7cl V3 Owner's Manual - Page 239
Adjusting the detection point of the touch screen (Calibration function)
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 239 highlights
Adjusting the detection point of the touch screen (Calibration function) Adjusting the detection point of the touch screen (Calibration function) Here's how to correctly align the positions of the LCD display and the touch screen. 1 While holding down the SCENE MEMORY [STORE] key of the panel, turn on the power. After the opening screen, the following startup menu screen will appear. 3 Press the START button. A confirmation dialog box will appear. 4 Press the OK button in the dialog box. A cross-shaped cursor will appear in the screen. 5 This cursor will appear a total of three times. Press each location at which it appears. NOTE • In order to set the detection points accurately, press the cross-shaped cursor from the position and posture in which you normally operate the unit. 2 Press the TOUCH SCREEN CALIBRATION button. The TOUCH SCREEN CALIBRATION MODE screen will appear, allowing you to adjust the touch screen. 6 Press the EXIT button. The M7CL will start up in normal operating mode. HINT • Alternatively, you can continue by selecting a different menu instead of pressing the EXIT button. HINT • When you cannot start calibration by touching, press the SCENE MEMORY[▲][▼ ] key to select TOUCH SCREEN CALIBRATION button and then press the [STORE] key to start. 20 Other functions M7CL Owner's Manual 239