Yamaha M7CL M7cl V3 Owner's Manual - Page 192
Connecting the M7CL-32/48 to the SB168-ES, Daisy chain connection, Ring connection - expansion cards
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 192 highlights
Using an external head amp Connecting the M7CL-32/48 to the SB168-ES To remotely control the SB168-ES from the M7CL-32/48, install an MY16-ES64 EtherSound card in a slot on the M7CL-32/48, then use an Ethernet cable to connect the M7CL-32/48 to the SB168-ES. And then, use a D-sub 9pin cross cable to connect the REMOTE connector located on the rear panel of the M7CL-32/48 to the MY16-ES64's HA REMOTE connector. This connection enables you to remotely control the SB168-ES from the M7CL-32/48. Alternatively, you can use a daisy chain or ring connection and install two MY16-EX expansion cards in the slots on the M7CL-32/48 to remotely control up to three SB168ES units simultaneously. ● Daisy chain connection Audio signals Remote signals M7CL-32/48 REMOTE connector HA REMOTE connector MY16ES64 OUT IN SB168-ES OUT IN SB168-ES OUT IN SB168-ES MY16EX MY16EX ● Ring connection Audio signals Remote signals M7CL-32/48 REMOTE connector HA REMOTE connector IN MY16ES64 OUT IN SB168-ES OUT IN SB168-ES OUT IN SB168-ES OUT MY16EX MY16EX NOTE • Please refer to the SB168-ES Owner's Manual for information on setting up the MY16-ES64/MY16-EX cards and EtherSound network. 192 M7CL Owner's Manual