Yamaha M7CL M7cl V3 Owner's Manual - Page 23
Stereo/mono Master Navigation Keys In 41-48] Key M7cl-48/48es Only - 32 case
![]() |
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Top panel ■ STEREO/MONO MASTER section In this section you can control the principal parameters of the STEREO/MONO channels. 1 2 3 4 1 [SEL] key This key selects the channel to be controlled. When you press this key to make the LED light, that channel will be selected for control in the SELECTED CHANNEL sec- tion and in the touch screen. 2 For the STEREO channel, the selected object of control will alternate between the L and R channels each time you press the [SEL] key. Panels and controls B [CUE] key This key selects the channel to be cue-monitored. If cue is on, the LED will light. C [ON] key This key switches the channel on/off. If a channel is on, the key LED will light. If the FADER ASSIGN MODE for MONITOR FADER is set to MONO or STEREO, this key switches the monitor output on or off. D Fader This adjusts the output level of the channel. If the FADER ASSIGN MODE for MONITOR FADER is set to MONO or STEREO, this fader adjusts the monitor output level. ■ NAVIGATION KEYS section In this section you can select the channels that will be controlled by the Centralogic section and in the touch screen. NOTE • If you press and hold a navigation key for two seconds or longer, that key will blink. At this time, only the object of control for the Centralogic section will be changed to the corresponding channels and fixed. If you press a different navigation key while the first key is blinking, only the object of control in the touch screen will be changed. 34 98 L 1 25 JK 67 1 [IN 1-8] key B [IN 9-16] key C [IN 17-24] key D [IN 25-32] key These keys select INPUT channels 1-8, 9-16, 17-24, and 25-32 respectively. E [ST IN] key This key selects ST IN channels 1-4. F [DCA] key This key selects the DCA groups. G [MIX 1-8] key H [MIX 9-16] key These keys select MIX channels 1-8 and 9-16 respectively. I [MATRIX] key This key selects MATRIX channels 1-8. J [STEREO] key This key assigns the STEREO channel L/R and the MONO channel to modules 1-3 of the Centralogic section. In this case, modules 4-8 are not used. K [IN 33-40] key (M7CL-48/48ES only) L [IN 41-48] key (M7CL-48/48ES only) These keys select INPUT channels 33-40 and 41-48 respectively. M7CL Owner's Manual 23
![](/manual_guide/products/yamaha-m7cl-m7cl-v3-owners-manual-9670c06/23.png)