Yamaha M7CL M7cl V3 Owner's Manual - Page 185
Tempo, Play/rec, High/mid/low Buttons
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
About the internal effects C Effect type field This shows the effect title, the name of the type that is used, and a graphic. The number of input/output channels (1 IN/2 OUT or 2 IN/2 OUT) of this effect is also shown. When you press this field, the EFFECT TYPE popup window will appear, allowing you to select the effect type. D EFFECT CUE button This button cue-monitors the output of the currently displayed effect. This cue function is valid only while this screen is displayed. The cue will be cancelled automatically when you switch to a different screen. E Special parameter field This shows special parameters that are specific to some effect types. F BYPASS button This button temporarily bypasses the effect. G Input/output meters These indicate the level of the signals before and after the effect. H Effect parameter field This area shows parameters for the currently selected effect type. When you press a knob in this field, you'll be able to use the multifunction encoders to control the corresponding horizontal row of knobs. I Rack select tabs These tabs switch between racks 1-8. 3 To change the effect type, press the effect type field to open the EFFECT TYPE popup window. Press a new effect type to select it. HINT • For details on the parameters of each effect type, refer to the supplementary material at the end of this manual (→ p. 253). 5 Edit the settings in the special parameter field as necessary. For some effect types, parameters such as the following will appear in the special parameter field. ● TEMPO This is shown if a tempo-type or modulation-type effect is selected. 1 1 MIDI CLK button If you turn this button on, the BPM parameter of that effect will be set to match the tempo of the MIDI timing clock being input from the MIDI port. ● PLAY/REC This is shown if FREEZE is selected as the effect type. 1 1 PLAY button / REC button These buttons are used to record (sample) and play back when using the freeze effect. For details on how to use this, refer to "Using the Freeze effect" (→ p. 188). 16 ● SOLO This is shown if M.BAND DYNA. or M.BAND COMP. is selected as the effect type. Graphic EQ and effects HINT • You can also switch the effect type by recalling a library. NOTE • Effect types "HQ.PITCH" and "FREEZE" can be used only in rack 5 or 7. Also, even if you copy these two effect types, you will not be able to paste them to rack 6 or 8. 4 To edit the effect parameters, press a knob in the effect parameter field to select it, and turn the corresponding multifunction encoder. 1 2 1 HIGH/MID/LOW buttons These buttons pass only the selected frequency band (multiple selections are allowed). B Gain reduction meters These show the amount of gain reduction for each band. M7CL Owner's Manual 185