Yamaha M7CL M7cl V3 Owner's Manual - Page 94
THRESHOLD knob, OVER indicator, Level meter, DYNAMICS ON/OFF buttons, Parameter knobs, FREQUENCY knob
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Operations in the SELECTED CHANNEL section ● Changing the output patching (output channels only) To change the output patching of an output channel in the SELECTED CHANNEL VIEW screen, use the popup button in the PATCH field. When you press the popup button, the PATCH/NAME popup window will appear, allowing you to select the output port and specify the channel name and icon. (For details on the popup window → p. 108). ● Making dynamics settings To edit the dynamics for the currently selected channel, use the DYNAMICS 1/DYNAMICS 2 field of the SELECTED CHANNEL VIEW screen or the [DYNAMICS 1]/[DYNAMICS 2] encoders of the SELECTED CHANNEL section. NOTE • The DYNAMICS 2 field of the SELECTED CHANNEL VIEW screen and the [DYNAMICS 2] encoder of the SELECTED CHANNEL section are valid only if an input channel is selected. The DYNAMICS 1/DYNAMICS 2 field of the SELECTED CHANNEL VIEW screen contains the following items. 2 3 4 1 5 1 THRESHOLD knob This indicates the setting of the THRESHOLD parameter of a gate or compressor. To edit the setting, use the [DYNAMICS 1]/[DYNAMICS 2] encoders of the SELECTED CHANNEL section. B OVER indicator This will light if the output level of the dynamics reaches the overload point. C Level meter This displays a bar graph indication of the signal level being input to the dynamics (on=green, off=gray) and the amount of gain reduction (orange). The THRESHOLD setting is shown numerically and as a vertical line. D DYNAMICS ON/OFF buttons These buttons turn dynamics processors 1/2 on/off. E Parameter knobs These knobs indicate the values of parameters other than THRESHOLD. To edit the dynamics settings, switch the DYNAMICS ON/OFF button on, and use the [DYNAMICS 1]/ [DYNAMICS 2] encoders of the SELECTED CHANNEL section to adjust the THRESHOLD parameter. If you want to edit parameters other than THRESHOLD, or to recall existing data from the library, press any location within the field to access the DYNAMICS 1/ DYNAMICS 2 popup window. (For details on the popup window → p. 118). ● Making HPF/EQ settings To edit the HPF of the currently selected channel, use the HPF field of the SELECTED CHANNEL VIEW screen or the [HPF] encoder of the SELECTED CHANNEL section (input channels only). The HPF field of the SELECTED CHANNEL VIEW screen contains the following items. 1 2 1 FREQUENCY knob Indicates the cutoff frequency of the HPF. B HPF ON/OFF button Switches the HPF on/off. To edit the HPF, turn the HPF ON/OFF on, and use the [HPF] encoder of the SELECTED CHANNEL section to adjust the cutoff frequency. To edit the EQ of the currently selected channel, use the EQ field of the SELECTED CHANNEL VIEW function or the EQ [Q], EQ [FREQUENCY], and EQ [GAIN] encoders of the SELECTED CHANNEL section. The EQ field of the SELECTED CHANNEL VIEW screen contains the following items. 2 3 1 1 Q/FREQUENCY/GAIN knobs These knobs indicate the Q, FREQUENCY (center frequency), and GAIN (amount of boost/cut) for each band (LOW, LOW-MID, HIGH-MID, and HIGH). 94 M7CL Owner's Manual