Yamaha M7CL M7cl V3 Owner's Manual - Page 91
Operations in the SELECTED CHANNEL RECALL SAFE field
![]() |
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
About the SELECTED CHANNEL VIEW screen • Operations in the SELECTED CHANNEL section I EQ graph field This shows the response of the EQ/HPF. J INSERT field (INPUT, MIX, MATRIX, STEREO, and MONO channels only) The signal route for insertion in the channel can be switched on/off here. K DIRECT OUT field (INPUT channels only) This is an on/off switch for the signal that is directly output from the channel. The output level is also shown here. L RECALL SAFE field Switches the Recall Safe status on/off for that channel. If only some of the channel parameters are set to Recall Safe, the PARTIAL indicator will light. M FADER field Here you can view the input/output level of the channel, and switch it on/off. N DCA field (input channels only) Here you can select the DCA group to which that channel is assigned. O MUTE field Here you can select the mute group to which that channel is assigned. Operations in the SELECTED CHANNEL section 7 This section explains how you can use the SELECTED CHANNEL section to control all of the parameters for a specific channel. Operations in the SELECTED CHANNEL section 1 Use a [SEL] key to select the channel you want to control. The SELECTED CHANNEL section controls the channel that was last selected by its [SEL] key. To select an INPUT, ST IN, STEREO, or MONO channel, press the appropriate [SEL] key in the INPUT section, ST IN section, or STEREO/MONO MASTER section of the top panel. To select a MIX or MATRIX channel, use the navigation keys to recall the desired channel to the Centralogic section, and then press the [SEL] key for the desired channel. The number and name of the currently selected channel is shown in the channel select field located in the function access area of the touch screen. Channel number Channel name HINT • In addition, you can make settings in the PREFERENCE screen so that you can access detailed parameters that cannot be edited in the SELECTED CHANNEL section. (For details, refer to p. 214). Even if a different screen is selected, the knobs of the SELECTED CHANNEL section always affect the currently selected channel. In this case, a window indicating the value of that parameter will appear in the screen when you operate a knob. HINT • In the case of ST IN channels or STEREO channels, you can switch between L and R by repeatedly pressing the same [SEL] key. • You can also switch channels by pressing the channel select field located in the function access area. Pressing the left side will select the preceding channel, and pressing the right side will select the next channel. 2 Press any one of the knobs in the SELECTED CHANNEL section. When you press a knob in the SELECTED CHANNEL section, the SELECTED CHANNEL VIEW screen for the currently selected channel will appear. If you leave this screen displayed, you will always be able to view the settings in the screen while operating an encoder of the SELECTED CHANNEL section. 3 Use the encoders of the SELECTED CHANNEL section and the buttons in the SELECTED CHANNEL VIEW screen to edit the parameters of the selected channel. M7CL Owner's Manual 91
![](/manual_guide/products/yamaha-m7cl-m7cl-v3-owners-manual-9670c06/91.png)