Yamaha M7CL M7cl V3 Owner's Manual - Page 103
LCR indicator INPUT, ST IN, MIX chan, ST/MONO indicator INPUT,
![]() |
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Operations in the Centralogic section ● Adjusting the pan/balance (INPUT, ST IN, STEREO, and MIX channels only) In the OVERVIEW screen, you can use the TO STEREO/ MONO field to switch the on/off status and adjust the pan/ balance of the signal sent from each channel to the STEREO/MONO buses. The following items are shown in the TO STEREO/MONO field. 12 3 1 PAN/BALANCE knob • When an INPUT channel or monaural MIX channel is selected ........ The panning of the signal sent to the STEREO bus is shown. • When a ST IN channel or a stereo MIX channel is selected ........ The balance of the left/right signals sent to the STEREO bus is shown and adjust the output balance to the STEREO bus. • When a STEREO channel or a stereo MATRIX channel is selected ........ The balance of the left/right output signals is shown. To adjust the value, press the knob to select it, and operate multifunction encoders 1-8. If you press the selected knob once again, the TO STEREO/MONO popup window (8 ch) will appear. In this popup window, you can switch between ST/ MONO mode and LCR mode, and change the on/off status of the signal sent to the STEREO/MONO bus for up to eight channels at a time. (For details on the popup window → p. 63). B OVER indicator This indicator will light if any of the level detection points in each channel reach the OVER level. C ST/MONO indicator (INPUT, ST IN, and MIX channels only) This indicates the on/off status of the signal sent from that channel to the STEREO (L/R) bus and MONO (C) bus. To switch this on/off, press the selected knob once again to open the TO STEREO/MONO popup window. If an INPUT, ST IN, or MIX channel is set to LCR mode, the C area will change as follows. 4 ● Assigning a channel to a DCA group or Mute group In the OVERVIEW screen, you can use the DCA/MUTE GROUP field to assign a channel to a DCA group (input channels only) or mute group. This field includes the following items. 1 2 1 DCA indicator (input channels only) This indicator shows the DCA group(s) to which the input channel is assigned. The numbers of DCA groups to which this channel belongs are highlighted. B Mute indicator This indicator shows the mute groups to which the channel is assigned. The numbers of mute groups to which this channel belongs are highlighted. 8 To assign a channel to a DCA group or Mute group, press the DCA/MUTE GROUP field to open the DCA/MUTE GROUP ASSIGN popup window. (For details on the popup window → p. 124). Operations in the Centralogic section D LCR indicator (INPUT, ST IN, MIX channels only) The LCR indicator shows the overall on/off status of the signals sent from that channel to the STEREO (L/ R) bus and MONO (C) bus. To switch this on/off, press the selected knob once again to open the TO STEREO/MONO popup window. M7CL Owner's Manual 103
![](/manual_guide/products/yamaha-m7cl-m7cl-v3-owners-manual-9670c06/103.png)