Yamaha M7CL M7cl V3 Owner's Manual - Page 154
Using the Monitor function, panel OMNI OUT jacks, 2TR OUT DIGITAL
![]() |
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
About the monitor/cue functions • Using the Monitor function ● ON (On/off) Switches the monitor function on/off. ● DELAY (Monitor delay) Delays the monitor signal. The Delay function is disabled if the Cue signal is being output. ● PHONES LEVEL (Headphone level) Adjusts the output level of only the PHONES OUT jack. ● PHONES LEVEL LINK (Headphone level link function) If this is on, the MONITOR LEVEL knob will adjust the level of the signal sent to the PHONES OUT jack. Using the Monitor function This section explains how to select the desired monitor source, and monitor it from the PHONES OUT jack or external monitor speakers. 1 Connect your monitor system to the rear panel OMNI OUT jacks, 2TR OUT DIGITAL jack, or an I/O card installed in a slot. The monitor signal can be sent to any desired output jack or output channel. If you're monitoring through headphones, make sure that your headphones are connected to the PHONES OUT jack under the front pad. 2 In the function access area, press the MONITOR button to access the MONITOR screen. In the MONITOR screen, the MONITOR field lets you check the current monitor settings, and turn monitoring on/off. The MONITOR screen includes the following items. 2 34 5 6 1 7 8 D MONITOR FADER field This adjusts the monitor fader level. It also indicates FADER ASSIGN MODE. Use the MONITOR popup window to engage FADER ASSIGN MODE. E Meter field This indicates the level of the monitor signal. This meter shows the level immediately before the dimmer. The MONITOR popup window will appear if you press this field, allowing you to make detailed settings for monitoring. F OUTPUT button Turns the monitor output on/off. G PHONES LEVEL LINK button If this is on, the MONITOR LEVEL knob will adjust the level of the signal sent to the PHONES OUT jack. H MONO MONITOR button This button allows monaural monitoring. If this button is on, the signal sent from the PHONES OUT jack and the MONITOR OUT L/R channels will be monaural. 3 Press the popup button or the meter field to open the MONITOR popup window. In the MONITOR popup window you can make detailed settings for monitoring. The popup window includes the following items. 1 42 3 87 9 5 1 Popup button Opens the MONITOR popup window, where you can J make detailed settings for monitoring. B SOURCE SELECT field 6 Use the buttons in this field to select the monitor source. K C DIMMER field The Dimmer function which temporarily attenuates the monitor signal can be switched on/off here. If you press the knob in this field so that it is enclosed by a heavy frame, you can use multifunction encoder 4 to adjust the amount of attenuation. 154 M7CL Owner's Manual
![](/manual_guide/products/yamaha-m7cl-m7cl-v3-owners-manual-9670c06/154.png)