Yamaha M7CL M7cl V3 Owner's Manual - Page 55
In the To ST PAN/BALANCE field of the, In the STEREO/MONO MASTER
![]() |
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Setup items required when you start up the M7CL for the first time 3 In the To ST PAN/BALANCE field of the SELECTED CHANNEL VIEW screen, make sure that the ST button is on (white characters on a pink background). In the TO ST PAN/BALANCE field you can use the ST/MONO button to switch the signal sent from the input channel to the STEREO/MONO buses on/off. The knob in this field indicates the pan/balance of the signal sent to the STEREO bus. If the ST button is off (black characters on blue background), press the button to switch it on. 4 Verify that in the top panel, the [ON] of the corresponding input channel is on. The [ON] turns the corresponding channel on or off. If the [ON] key is off (LED dark), press the key to turn it on (LED lit). 5 In the STEREO/MONO MASTER section, make sure that the [ON] key of the STEREO channel is on, and raise the STEREO channel fader to 0 dB. 1 2 1 STEREO channel [ON] key B STEREO channel fader 6 Raise the fader of the currently selected input channel to an appropriate volume. In this state, you should now hear sound from the speaker system that is patched to the STEREO channel. If you don't hear sound, check whether the LR meters are moving in the METER field of the function access area. [METER field of the function access area] 4 Connections and setup ● If the LR meters are moving It may be that the STEREO channel is not correctly patched to the output jacks that are connected to your speaker system. Check the output port patching p. 105. ● If the LR meters are not moving Make sure that signals are being routed correctly to the patched input channels. HINT • The signal being output from the STEREO channel can also be monitored using headphones connected to the PHONES OUT jack located below the front pad p. 154. 7 To adjust the pan/balance of the signal sent from the input channel to the STEREO bus, turn the [PAN] encoder of the SELECTED CHANNEL section. When you turn the [PAN] encoder, the knob in the HA field of the SELECTED CHANNEL VIEW screen will move in tandem with the encoder. 8 Press the [SEL] key of another input channel, then repeat the procedure from Step 2. When you press a [SEL] key to select another channel, the channel shown in the SELECTED CHANNEL VIEW screen will change accordingly. M7CL Owner's Manual 55
![](/manual_guide/products/yamaha-m7cl-m7cl-v3-owners-manual-9670c06/55.png)