Yamaha M7CL M7cl V3 Owner's Manual - Page 76
for other MATRIX buses in the same way., When you're finished adjusting the MATRIX
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Sending the signal from an input channel to the MATRIX buses 4 Use the MATRIX bus selection buttons in the function access area to select the senddestination MATRIX bus. Alternatively, press a SEND LEVEL knob in the SELECTED CHANNEL section to display a popup window, from which you can select a MATRIX bus. HINT • Alternatively, press a SEND LEVEL knob in the SELECTED CHANNEL section to display a popup window, from which you can select a MIX bus. • You can also select a MATRIX bus by using the navigation keys and the [SEL] keys in the Centralogic section. If the MIX buses or MATRIX buses are selected when you press the [SEL] keys, the setting of the MIX/MTRX ON FADER switch button will be changed automatically. • If you press the currently-selected MATRIX bus select button, cue monitoring will be turned on for the related MATRIX channel. This method is convenient if you want to monitor the signal that is being sent to the selected MATRIX bus. 5 Use the faders in the INPUT or ST IN section on the top panel to adjust the send level of the signals routed from the input channels to the selected MATRIX bus. HINT • You can assign the SENDS ON FADER function to a userdefined key. This lets you quickly switch to SENDS ON FADER mode for a specific MATRIX bus, and quickly switch back again. 6 Repeat steps 4-5 to adjust the send level for other MATRIX buses in the same way. 7 When you're finished adjusting the MATRIX send levels, press the "×" symbol in the function access area. The function access area display will return to its prior state, and the M7CL will exit SENDS ON FADER mode and return to normal mode. 76 M7CL Owner's Manual