Yamaha M7CL M7cl V3 Owner's Manual - Page 53
Using the Centralogic settings for eight channels, Connect a mic or instrument to an INPUT
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Setup items required when you start up the M7CL for the first time 4 While playing a musical instrument or speaking or singing into a microphone, turn the [HA] encoder in the SELECTED CHANNEL section to adjust the gain of the currently selected channel. Adjust the gain level as high as possible without allowing the OVER segment of the channel strip level meter to light at the highest audio input level. When you turn the [HA] encoder in the SELECTED CHANNEL section, the knob in the HA field of the SELECTED CHANNEL VIEW screen will move in tandem with the encoder. NOTE • The PAD will be internally switched on or off when the HA gain is adjusted between -14 dB and -13 dB. Keep in mind that noise may be generated if there is a difference between the Hot and Cold output impedance of the external device connected to the INPUT connector when using phantom power. • If the level meter does not show any movement even if you have raised the [HA] encoder, it is possible that the INPUT channel selected by its [SEL] key does not match the INPUT jack to which your mic or instrument is connected. Make sure that the connections and the selection of the [SEL] key are correct. If necessary, recall scene number 000 once again. 5 Press the [SEL] key of another input channel, and adjust the head amp gain in the same way. When you press a [SEL] key to select another channel, the channel shown in the SELECTED CHANNEL VIEW screen will change accordingly. HINT • In the SELECTED CHANNEL VIEW screen you can also switch the head amp's phantom power on/off, and switch the phase between normal and reverse. To do this, press the HA/ PHASE field to access the popup window. (For details on the procedure → p. 61). The navigation keys of the NAVIGATION KEYS section select the eight channels or DCA groups that will be controlled by the Centralogic section. In this section, the following keys correspond to input channels. ● [IN 1-8] key ● [IN 9-16] key ● [IN 17-24] key ● [IN 25-32] key These keys select INPUT channels 1-8, 9-16, 17- 24, and 25-32 respectively. ● [ST IN] key This key selects ST IN channels 1-4. 4 ● [IN 33-40] key (M7CL-48/48ES only) ● [IN 41-48] key (M7CL-48/48ES only) These keys select INPUT channels 33-40 and 41- 48 respectively. Connections and setup When you press a navigation key, the OVERVIEW screen will appear in the display, and the principal parameters of the up to eight selected channels are shown simultaneously. You can use the keys and faders of the Centralogic section to control the level, on/off status, and cue operations of the selected eight channels or DCA groups. 1 2 3 4 5 ● Using the Centralogic section (settings for eight channels) Use the Centralogic section and the OVERVIEW screen to make head amp settings for up to eight channels. This method is convenient when you want to adjust the same parameter for multiple channels at once. 1 Connect a mic or instrument to an INPUT jack. (For details on making connections → p. 46). 2 Press a navigation key in the NAVIGATION KEYS section so that the input channels you want to control are assigned to the Centralogic section. 6 1 Multi-function encoders B [SEL] keys C [CUE] keys D Level meters E [ON] keys F Faders HINT • You can rapidly switch from the SELECTED CHANNEL VIEW screen to the OVERVIEW screen by pressing one of the multifunction encoders in the Centralogic section. M7CL Owner's Manual 53