Yamaha M7CL M7cl V3 Owner's Manual - Page 49
Installing an option card, Align the edges of the card with the guard
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Audio input/output connections ■ Installing an option card Before you install I/O cards in slots 1-3, you must check the Yamaha website to determine whether the card is compatible with the M7CL, and to verify the total number of Yamaha or third-party cards that can be installed in combination with that card. Yamaha website: http://www.yamahaproaudio.com/ To install an optional mini-YGDAI card, proceed as follows. 1 Make sure that the power is turned off. 2 Loosen the screws that hold the slot cover in place, and remove the slot cover. Keep the removed slot cover in a safe place. 4 Use the screws included with the card to fasten the card in place. 4 Malfunctions or incorrect operation may occur if the card is not fastened. CAUTION • Before connecting a separately sold mini-YGDAI I/O card to the M7CL, you must turn off the power switch of the M7CL and the PC800W power supply. Failure to observe this will cause malfunctions or electric shock. Connections and setup Slot cover 3 Align the edges of the card with the guard rails inside the slot, and insert the card into the slot. Push the card all the way into the slot so that the connector at the end of the card is correctly inserted into the connector inside the slot. Card M7CL Owner's Manual 49