Yamaha M7CL M7cl V3 Owner's Manual - Page 21
Centralogic Multi-function encoders, SEL] key, CUE] key, Meter LEDs, ON] key, Fader
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
■ USB storage device capacities and formats The operation of storage media with capacities of up to 16GB has been verified. (However, this does not necessarily guarantee the operation of all USB storage media.) The FAT12, FAT16 and FAT32 formats are supported. On the M7CL V1.12 or higher, storage media with a capacity of 4GB or larger will be formatted in FAT32 and storage media with a capacity of 2GB or smaller will be formatted in FAT16. ■ Prevention of accidental erasure Some USB storage devices have a write protect setting that lets you prevent data from being erased accidentally. If your storage device contains important data, it's a good idea to use the write protect setting to prevent accidental erasure. On the other hand, you'll need to make sure that your USB storage device's write protect setting is turned off before you save data. Top panel CAUTION • An ACCESS indicator is shown in the function access area while data is being accessed (saved, loaded, or deleted). Do not disconnect the USB connector or power-off the M7CL while this indicator is shown. Doing so may damage your stor- age media, or may damage the data in the M7CL or on your media. 2 Panels and controls ■ Centralogic section In this section you can control a group of (up to) eight channels or DCA groups selected in the NAVIGATION KEYS section. 1 2 3 4 5 6 1 Multi-function encoders According to the type of screen that is currently selected, these encoders control the knobs selected in the touch screen. B [SEL] key These keys select the channel to be controlled. When you press this key to make the LED light, that channel will be selected for control in the SELECTED CHANNEL section and in the touch screen. C [CUE] key These keys select the channel to be cue-monitored. If cue is on, the LED will light. D Meter LEDs These LEDs indicate the input/output level of the channel. E [ON] key This switches the channel on/off. If a channel is on, the key LED will light. F Fader This adjusts the input/output level of the channel. You can also make internal settings (→ p. 177) so that these faders are used as controllers to adjust the gain of each GEQ band. M7CL Owner's Manual 21