Yamaha M7CL M7cl V3 Owner's Manual - Page 242
Connecting SB168-ES units to the M7CL-48ES using the Stage Box Setup function
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 242 highlights
Connecting SB168-ES units to the M7CL-48ES using the Stage Box Setup function Connecting SB168-ES units to the M7CL-48ES using the Stage Box Setup function When you connect one M7CL-48ES to up to three SB168-ES units, using the Stage Box Setup function enables you to set up the EtherSound patches and word clock without using AVSESMonitor. For more information on setting up patches, refer to "Connecting SB168-ES units to the M7CL48ES using the STAGE BOX SETUP function" (→ p. 43). You can use the Stage Box Setup function in the EXT-ES HA field in the VIRTUAL RACK window. Use one of the following two methods to display the EXT-ES HA field: • Press the SETUP button, then press the STAGE BOX SETUP button in the SETUP screen. • Press the RACK button, press the EXT-ES HA tab in the VIRTUAL RACK window, then press the SB168-ES button in the VIEW field. 1 2 1 AUTO CONFIGURE button This button switches the automatic configuration of EtherSound patches on and off. When this button is switched on, the master clock will be set to INT 48kHz (in a daisy chain connection) or to EtherSound (48kHz) (in a ring connection). If you want to change the EtherSound setting in AVSESMonitor or if you want the M7CL-48ES or SB168-ES to start up with the settings made in AVS-ESMonitor, switch this button off. NOTE • The word clock setting cannot be changed if the AUTO CONFIGURE button is turned ON. B DAISY CHAIN / RING buttons Use these buttons to switch to DAISY CHAIN (daisy chain connection) or RING (ring connection) setup, according to the connection with the SB168-ES. For more information on daisy chain and ring connections, please refer to "Connecting SB168-ES units to the M7CL-48ES using the STAGE BOX SETUP function" (→ p. 43). Changing settings to suit the connection You can connect the M7CL-48ES and SB168-ES units in a daisy chain or ring connection. If the connection type and the Stage Box Setup data do not match, the patch and word clock settings will not work properly. NOTE • Also, be sure to change the SB168-ES dip switches according to the connection type. (→ p. 43) 1 Press the AUTO CONFIGURE button to turn it off (the button indicator will turn off). 2 Press the DAISY CHAIN button for a daisy chain connection. Press the RING button for a ring connection. 3 Press the AUTO CONFIGURE button to turn it on (the button indicator will light). A setup confirmation dialog box is displayed. 4 Confirm that the setting is correct, then press the OK button. 242 M7CL Owner's Manual