Yamaha M7CL M7cl V3 Owner's Manual - Page 162
Using talkback, INPUT TO TALKBACK field
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Using talkback Using talkback The Talkback function sends the signal (that is input at the input jacks) to the desired bus. 1 In the function access area, press the MONITOR button to access the MONITOR screen. In the MONITOR screen, the TALKBACK field lets you check the current talkback settings, and turn talkback on/off. If you want to view or edit the talkback settings in greater detail, use the TALKBACK popup window described in step 2 and following. 2 Press the popup button or the ASSIGN field to open the TALKBACK popup window. In this popup window you can make detailed settings for talkback. 1 2 43 12 3 4 5 1 Popup button Opens the TALKBACK popup window. B TALKBACK IN field This indicates the input level of the mic connected to the TALKBACK jack, and the phantom power on/off status. C INPUT TO TALKBACK field This field indicates the input sensitivity, input level, and phantom power on/off status of the INPUT, ST IN and OMNI IN jacks that are being used for talkback. You can use the buttons located at the left of this field to select a jack used for talkback. If you press the GAIN knob in this field to select it, you will be able to use the corresponding multifunction encoder to adjust the input sensitivity. D ASSIGN field Indicates the bus to which the talkback signal is sent. You can press this field to open the TALKBACK popup window. E TALKBACK ON button Switches talkback on/off. 1 TALKBACK IN field • +48V button... This is an on/off switch for the phantom power (+48V) supplied to the TALKBACK jack. • TALKBACK jack level ........... This indicates the input level of the mic connected to the TALKBACK jack. B INPUT TO TALKBACK field • Input select button ........... Opens the INPUT PORT SELECT popup window, where you can select an INPUT jack other than the TALKBACK jack used for talkback. • +48V button ........... This is an on/off switch for the phantom power (+48V) supplied to the INPUT jack used for talkback. • GAIN knob..... Adjusts the input sensitivity of the INPUT jack used for talkback. Use the corresponding multifunction encoder to make this adjustment. You can also use the MONITOR screen GAIN knob to adjust this. • Input level...... Indicates the input level of the mic connected to the INPUT jack used for talkback. C TALKBACK ON button Switches talkback on/off. This operation can also be performed using the MONITOR screen TALKBACK ON button. D ASSIGN field Selects the bus(es) to which the talkback signal will be sent. You can press the CLEAR ALL button to defeat all selections. 162 M7CL Owner's Manual