Yamaha M7CL M7cl V3 Owner's Manual - Page 86
Using the Centralogic the MIX/MATRIX SEND LEVEL knobs
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Sending signals from MIX channels and STEREO/MONO channels to MATRIX buses 5 Make sure that the TO MATRIX SEND ON/ OFF button is turned on for the send-destination MATRIX bus. If this button is off, press the button in the screen to turn it on. 6 In the SELECTED CHANNEL section, use the MIX/MATRIX SEND LEVEL knobs to adjust the send levels to the MATRIX buses. HINT • If you want to monitor the signal being sent to a specific MATRIX bus, use the navigation keys to access the corresponding MATRIX channel, and press the appropriate [CUE] key in the Centralogic section. 7 Use the navigation keys and the [SEL] keys of the Centralogic section to switch channels, and adjust the send level from other channels to the MATRIX buses in the same way. Using the Centralogic section This method lets you use the multifunction encoders to simultaneously adjust the send levels from the eight channels selected in the Centralogic section to the desired MATRIX bus. 1 Make sure that an output port is assigned to the MATRIX bus to which you want to send signals, and that your external device is connected to the corresponding output port. For details on assigning an output port to a MATRIX bus refer to p. 105. For details on connecting an external device, refer to p. 46. 2 Use the navigation keys to access the OVERVIEW screen that includes the channel (MIX channels 1-8, 9-16, or STEREO/ MONO channels) that you want to control. In the OVERVIEW screen, you can use the TO MATRIX field to adjust the send levels to the MATRIX bus. 1 2 1 TO MATRIX field This field specifies the send level of the signal sent from the MIX and STEREO/MONO channels to the MATRIX bus. B TO MATRIX SEND LEVEL knob This adjusts the send level of the signal sent from the MIX or STEREO/MONO channel to the MATRIX buses. To adjust the send level, press the appropriate knob to select it, and operate multifunction encoders 1-8. If the send-destination MATRIX bus is set to stereo, the left knob of the two adjacent knobs will operate as a PAN knob (for stereo MIX channels or for the STEREO channel, the BALANCE knob). 3 Press the TO MATRIX SEND LEVEL knob for the desired send-destination MATRIX bus. A bold frame will appear around all TO MATRIX SEND LEVEL knobs for that MATRIX bus. 86 M7CL Owner's Manual