Yamaha M7CL M7cl V3 Owner's Manual - Page 71
Repeat steps 4-5 to adjust the send level, function access area.
![]() |
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
4 Use the MIX bus selection buttons in the function access area to select the senddestination MIX bus. HINT • Alternatively, press a SEND LEVEL knob in the SELECTED CHANNEL section to display a popup window, from which you can select a MIX bus. • You can also select a MIX bus by using the navigation keys and the [SEL] keys in the Centralogic section. If the MIX buses or MATRIX buses are selected when you press the [SEL] keys, the setting of the MIX/MTRX ON FADER switch button will be changed automatically. • If you once again press the MIX bus selection button that is currently selected, cue monitoring will be turned on for the corresponding MIX channel. This method is convenient when you want to monitor the signal that is being sent to the selected MIX bus. 5 Use the faders of the top panel INPUT section or ST IN section to adjust the send level from the input channels to the selected MIX bus. HINT • You can assign the SENDS ON FADER function to a userdefined key. This lets you quickly switch to SENDS ON FADER mode for a specific MIX bus, and quickly switch back again. Sending the signal from an input channel to a MIX bus 6 Repeat steps 4-5 to adjust the send level for other MIX buses in the same way. 7 When you're finished adjusting the MIX send levels, press the "×" symbol in the function access area. The function access area display will return to its prior state, and the M7CL will exit SENDS ON FADER mode and return to normal mode. 5 Input channel operations M7CL Owner's Manual 71
![](/manual_guide/products/yamaha-m7cl-m7cl-v3-owners-manual-9670c06/71.png)