Yamaha M7CL M7cl V3 Owner's Manual - Page 280

Functions that can be assigned to user-defined keys Functions that can be assigned to user-defined keys FUNCTION NO ASSIGN SCENE TALKBACK OSCILLATOR CUE CLEAR MONITOR EFFECT BYPASS TAP TEMPO MUTE MASTER METER BRIGHTNESS PAGE CHANGE CH SELECT SEND ENCODER SET BY SEL PARAMETER 1 PARAMETER 2 Explanation - - No assignment. INC RECALL - Recall the scene of the next existing number. DEC RECALL - Recall the scene of the previous existing number. DIRECT RECALL SCENE #000-#300 Directly recall the scene of the specified number. RECALL UNDO - Execute RECALL UNDO. STORE UNDO - Execute STORE UNDO. TALKBACK ON LATCH UNLATCH Switch TALKBACK on/off. Turn TALKBACK on while pressed. SELECTED CH ASSIGN - While holding down this key, press a SEL key of an OUTPUT channel to switch the assignment on/off. During this time, the [SEL] LED will be lit if assign is ON, or dark if OFF. The assignment setting made while holding down this key will be stored. Pressing the key again will recall the stored setting. Settings can be stored in multiple keys to facilitate rapid assignment switching. OSCILLATOR ON - Switch the OSC on/off. SELECTED CH ASSIGN - While holding down this key, press a SEL key of an OUTPUT channel to switch the assignment on/off. During this time, the [SEL] LED will be lit if assign is ON, or dark if OFF. - - Clear all CUE settings together. MONITOR ON - Switch MONITOR on/off. SELECTED CH ASSIGN - While holding down this key, press the SEL key of a MIX or MATRIX channel to switch the assignment on/off. During this time, the [SEL] LED will be lit if assign is ON, or dark if OFF. The assignment setting made while holding down this key will be stored. Pressing the key again will recall the stored setting. Settings can be stored in multiple keys to facilitate rapid assignment switching. SOURCE SELECT (M7CL-32/48) STEREO L/R, MONO(C), LCR, STIN1-4, DEFINE (M7CL-48ES) STEREO L/R, MONO(C), LCR, OMNI1-8, DEFINE Recall the selected signal to the monitor. DIMMER ON - Switch the monitor dimmer function on/off. MONO MONITOR - Switch MONO MONITOR on/off. RACK 5-8 - Bypass the specified effect. CURRENT PAGE - Use the tap tempo function in the displayed screen. RACK 5-8 - Use the tap tempo function for the specified effect. MUTE GROUP 1-8 - Switch MUTE GROUP MASTER on/off. PEAK HOLD ON - Turn the meter PEAK HOLD function on/off. BANK CHANGE - Toggle between the brightness settings stored in A and B. PAGE BOOKMARK - Memorize the currently selected screen (hold down the key for two seconds or longer), or display the last-memorized screen (press and release the key within two seconds). Popup screens can also be memorized. In the case of a rack, the number of that rack is also memorized. CLOSE POPUP - Close the displayed popup window. INC, DEC - Decrement the channel selection. TO MIX/TO MATRIX - If INPUT or ST IN is selected, swich the function of the Selected Channel section's send encoders from TO MIX/TO MATRIX. SET [+48V] - SET [Ø] - SET [INSERT ON] - SET [DIRECT OUT ON] - SET [PRE SEND] - SET [TO STEREO] - Hold down this key and press SEL to switch it on/off. During this time, the [SEL] LED will be lit if on or dark if off. If SET [PRE SEND] is selected, "SEND ON FADER" mode is engaged while you are holding down the [SEL] key. SET [TO MONO] - SET [TO LCR] - 280 M7CL Owner's Manual