Yamaha M7CL M7cl V3 Owner's Manual - Page 264

Effects Parameters ■ COMP260 This effect emulates the characteristics of mid 70's compressors/limiters that are the standard for live SR. You can control two monaural channels independently. You can also link several parameters via stereo links. Parameter Range THRE.1 -60.0 to 0.0 dB KNEE1 SOFT, MEDIUM, HARD ATTACK1 0.010-80.0 ms RELEASE1 6.2-999.0 ms RATIO1 1.00-500, ∞ OUTPUT1 -20.0 to 40.0 dB THRE.2 -60.0 to 0.0 dB KNEE2 SOFT, MEDIUM, HARD ATTACK2 0.010-80.0 ms RELEASE2 6.2-999.0 ms RATIO2 1.00-500, ∞ OUTPUT2 -20.0 to 40.0 dB ST LINK OFF, ON Description Threshold of CH compressor Knee of CH1 compressor Attack time of CH1 compressor Release time of CH1 compressor Ratio of CH1 compressor Adjusts the CH1 output gain Threshold of CH2 compressor Knee of CH2 compressor Attack time of CH2 compressor Release time of CH2 compressor Ratio of CH2 compressor Adjusts the CH2 output gain Links CH1 and CH2 as a stereo pair. THRE., KNEE, ATTACK, RELEASE, and RATIO parameters are linked; OUTPUT parameter is not linked ■ COMP260S This effect emulates the characteristics of mid 70's compressors/limiters that are the standard for live SR. You can link and control the L and R channel parameters. Parameter Range THRE. -60.0 to 0.0 dB KNEE SOFT, MEDIUM, HARD ATTACK 0.010-80.0 ms RELEASE 6.2-999.0 ms RATIO 1.00-500, ∞ OUTPUT -20.0 to 40.0 dB Description Threshold of the compressor Knee of the compressor Attack time of the compressor Release time of the compressor Ratio of the compressor Adjusts the output gain ■ EQUALIZER601 This effect emulates the characteristics of 70's analog equalizers. Re-creating the distortion of typical analog circuits will add drive to the sound. Parameter LO TYPE LO F LO G MID1 Q MID1 F MID1 G MID2 Q MID2 F MID2 G INPUT OUTPUT MID3 Q MID3 F MID3 G MID4 Q MID4 F MID4 G HI TYPE HI F HI G Range HPF-2/1, LSH-1/2 16.0 Hz to 20.0 kHz -18.0 to +18.0 dB 0.50-16.00 16.0 Hz to 20.0 kHz -18.0 to +18.0 dB 0.50-16.00 16.0 Hz to 20.0 kHz -18.0 to +18.0 dB -18.0 to +18.0 dB -18.0 to +18.0 dB 0.50-16.00 16.0 Hz to 20.0 kHz -18.0 to +18.0 dB 0.50-16.00 16.0 Hz to 20.0 kHz -18.0 to +18.0 dB LPF-2/1, HSH-1/2 16.0 Hz to 20.0 kHz*1 -18.0 to +18.0 dB Description Type of EQ1 Cut-off frequency of EQ1 Gain of EQ1 Q of EQ2 Center frequency of EQ2 Gain of EQ2 Q of EQ3 Center frequency of EQ3 Gain of EQ3 Input gain Output gain Q of EQ4 Center frequency of EQ4 Gain of EQ4 Q of EQ5 Center frequency of EQ5 Gain of EQ5 Type of EQ6 Cut-off frequency of EQ6 Gain of EQ6 Parameter LO SW MID1 SW MID2 SW MID3 SW MID4 SW HI SW Range OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON TYPE CLEAN, DRIVE Description Switches EQ1 on/off Switches EQ2 on/off Switches EQ3 on/off Switches EQ4 on/off Switches EQ5 on/off Switches EQ6 on/off Selects the equalizer type. The CLEAN equalizer provides non-distorted, clear, typical digital sound, emulating variations in frequency response in the analog circuits. The DRIVE equalizer provides distorted, driven sound that enhances analog flavor, emulating changes in frequency response in the analog circuits. *1. 16.0 Hz to 20.0 kHz (LPF-1, LPF-2), 1.0 kHz to 20.0 kHz (HSH-1, HSH-2) ■ OPENDECK It emulates the tape compression created by two open reel tape recorders (a recording deck and a playback deck.) You can change the sound quality by adjusting various elements, such as the deck type, tape quality, playback speed, etc. Parameter REC DEC REC LVL REC HI REC BIAS REPR DEC REPR LVL REPR HI REPR LO MAKE UP TP SPEED TP KIND Range Swss70, Swss78, Swss85, Amer70 -96.0 to +18.0 dB -6.0 to +6.0 dB -1.00 to +1.00 Swss70, Swss78, Swss85, Amer70 -96.0 to +18.0 dB -6.0 to +6.0 dB -6.0 to +6.0 dB Off, On 15ips, 30ips Old, New Description Selects the recording deck type Adjusts the input level of the recording deck. As you raise the level, tape compression is generated, which narrows the dynamic range and distorts the sound Adjusts the high range gain of the recording deck Adjusts the bias of the recording deck Selects the playback deck type Adjusts the output level of the playback deck Adjusts the high range gain of the playback deck Adjusts the low range gain of the playback deck When you adjust the REC LVL, the REPR LVL reflects the change, maintaining the relative output level. You can change the amount of distortion without changing the output level. Selects the tape speed Selects the tape type 264 M7CL Owner's Manual