Yamaha M7CL M7cl V3 Owner's Manual - Page 149

● If an INPUT channel is selected Use the buttons in the lower part of the SAFE PARAMETER SELECT field (except for the "ALL" button) to select the parameters that will be subject to Recall Safe (multiple selections are allowed). If you want all parameters to be subject to Recall Safe, turn on the ALL button (this is the default setting). These buttons correspond to the following parameters. Button name ALL HA ATT EQ DYNA 1 DYNA 2 INPUT PATCH INSERT INSERT PATCH DIRECT OUT MIX SEND MIX ON MATRIX SEND MATRIX ON FADER CH ON Corresponding parameters All parameters Head amp settings (including external HA) Attenuater settings EQ settings (including HPF) Dynamics 1 settings Dynamics 2 settings Input channel patching Insert settings Insert patching Direct out settings Send levels of signals sent to MIX buses On/off status of signals sent to MIX buses Send levels of signals sent to MATRIX buses On/off status of signals sent to MATRIX buses Fader positions On/off status of [ON] keys NOTE • If the ALL button is on, all other buttons in the lower part of the SAFE PARAMETER SELECT field will be turned off. ● If a ST IN channel is selected With the exception of the types of button that are displayed, this is the same as for an INPUT channel. These buttons correspond to the following parameters. Using the Recall Safe function NOTE • If the ALL button is on, all other buttons in the lower part of the SAFE PARAMETER SELECT field will be turned off. ● If a MIX channel is selected Use the buttons in the lower part of the SAFE PARAMETER SELECT field (except for the "ALL" button) to select the parameters that will be subject to Recall Safe (multiple selections are allowed). In addition, you can use the WITH MIX SEND button displayed in the lower-left part of the field to enable Recall Safe for the on/off status and send level of the signals sent from input channels to MIX buses. If you want all parameters shown in the lower part of the field to be subject to Recall Safe, turn on the ALL button (this is the default setting). These buttons correspond to the following parameters. Button name ALL ATT EQ DYNA 1 INSERT INSERT PATCH MATRIX SEND MATRIX ON FADER CH ON OUTPUT PATCH WITH MIX SEND Corresponding parameters All parameters (except for WITH MIX SEND) Attenuator settings EQ settings Dynamics 1 settings Insert settings Insert patching Send levels of signals sent to MATRIX buses On/off status of signals sent to MATRIX buses Fader positions On/off status of [ON] keys Output channel patching On/off status and send level of signals sent from input channels to MIX buses NOTE • If the ALL button is on, all buttons will be turned off except for the WITH MIX SEND button located in the lower part of the SAFE PARAMETER SELECT field. • You can switch the WITH MIX SEND button on/off while the ALL button is left on. Scene memory 12 Button name ALL ATT EQ DYNA 1 DYNA 2 INPUT PATCH MIX SEND MIX ON MATRIX SEND MATRIX ON FADER CH ON Corresponding parameters All parameters Attenuator settings EQ settings Dynamics 1 settings Dynamics 2 settings Input channel patching Send levels of signals sent to MIX buses On/off status of signals sent to MIX buses Send levels of signals sent to MATRIX buses On/off status of signals sent to MATRIX buses Fader positions On/off status of [ON] keys M7CL Owner's Manual 149