Yamaha M7CL M7cl V3 Owner's Manual - Page 167
Meters, Operations in the METER screen,
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
Chapter 15 Meters This chapter explains the METER screen that shows the input/output level meters for all channels, and operations relating to the optional MBM7CL meter bridge. Operations in the METER screen By accessing the METER screen, you can view the input/output levels of all channels in the screen, or switch the level meter's metering points (the points in the signal route at which the level is detected). 1 In the function access area, press the METER field to access the METER screen. The METER screen will appear, and the background of the METER field will turn white. METER field CUE meter NOTE • If the CUE meter is shown in the METER field, pressing the CUE meter will forcibly defeat the cue that is currently turned on. • If the CUE meter is not shown in the METER field, pressing the CUE meter will switch to the METER screen. [METER screen] 1 2 3 7 8 9 1 MIX channels This area indicates the output levels and fader values of the MIX channels. If the corresponding MIX channels are assigned to the Centralogic section, operating the faders of the Centralogic section will change these values in realtime. B MATRIX channels This area indicates the output levels and fader values of the MATRIX channels. If the MATRIX channels are assigned to the Centralogic section, operating the faders of the Centralogic section will change these values in realtime. C STEREO channel L/R, MONO channel This area indicates the output levels and fader values of the STEREO channel L/R and MONO channel. Operating the corresponding fader will change the value in realtime. D INPUT channels 15 This area indicates the input levels and fader values of the INPUT channels. Operating the corresponding fader will change the value in realtime. Meters E ST IN channels This area indicates the input levels and fader values of the ST IN channels. Operating the corresponding fader will change the value in realtime. F Centralogic fader levels This area indicates the fader values of the channel/ DCA group assigned to the Centralogic section. Operating the corresponding fader will change the value in realtime. G Metering point select buttons (for output channels) Use these three buttons to select the metering point for output channels. H Metering point select buttons (for input channels) Use these three buttons to select the metering point for input channels. 4 5 6 M7CL Owner's Manual 167