Yamaha M7CL M7cl V3 Owner's Manual - Page 257
Mod. Filter, Distortion, Amp Simulate, Dyna. Filter, Dyna. Flange, One Input
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 257 highlights
■ MOD. FILTER Two input, two output modulation filter. Parameter FREQ. DEPTH PHASE TYPE OFFSET RESO. LEVEL SYNC NOTE Range 0.05-40.00 Hz 0-100% 0.00-354.38 degrees LPF, HPF, BPF 0-100 0-20 0-100 OFF/ON *1 Description Modulation speed Modulation depth Left-channel modulation and right-channel modulation phase difference Filter type: low pass, high pass, band pass Filter frequency offset Filter resonance Output level Tempo parameter sync on/off Used in conjunction with TEMPO to determine FREQ *1. ■ DISTORTION One input, two output distortion effect. Parameter DST TYPE DRIVE MASTER TONE N. GATE Range DST1, DST2, OVD1, OVD2, CRUNCH 0-100 0-100 -10 to +10 0-20 Description Distortion type (DST = distortion, OVD = overdrive) Distortion drive Master volume Tone Noise reduction ■ AMP SIMULATE One input, two output guitar amp simulator. Parameter Range Description AMP TYPE *1 Guitar amp simulation type DST TYPE DST1, DST2, OVD1, Distortion type (DST = distortion, OVD2, CRUNCH OVD = overdrive) DRIVE 0-100 Distortion drive MASTER 0-100 Master volume BASS 0-100 Bass tone control MIDDLE 0-100 Middle tone control TREBLE 0-100 High tone control N. GATE 0-20 Noise reduction CAB DEP 0-100% Speaker cabinet simulation depth EQ F 100 Hz-8.00 kHz EQ (peaking type) frequency EQ G -12.0 to +12.0 dB EQ (peaking type) gain EQ Q 10.0-0.10 EQ (peaking type) bandwidth *1. STK-M1, STK-M2, THRASH, MIDBST, CMB-PG, CMB-VR, CMBDX, CMB-TW, MINI, FLAT Effects Parameters ■ DYNA. FILTER Two input, two output dynamically controlled filter. Parameter Range SOURCE INPUT, MIDI SENSE 0-100 DIR. UP, DOWN DECAY TYPE OFFSET RESO. LEVEL *1 LPF, HPF, BPF 0-100 0-20 0-100 Description Control source: input signal or MIDI Note On velocity Sensitivity Upward or downward frequency change Filter frequency change decay speed Filter type Filter frequency offset Filter resonance Output Level *1. 6.0 ms-46.0 s (fs=44.1 kHz), 5.0 ms-42.3 s (fs=48 kHz) ■ DYNA. FLANGE Two input, two output dynamically controlled flanger. Parameter Range SOURCE INPUT, MIDI SENSE 0-100 DIR. UP, DOWN DECAY OFFSET *1 0-100 FB.GAIN -99 to +99% LSH F LSH G EQ F EQ G EQ Q HSH F HSH G 21.2 Hz-8.00 kHz -12.0 to +12.0 dB 100 Hz-8.00 kHz -12.0 to +12.0 dB 10.0-0.10 50.0 Hz-16.0 kHz -12.0 to +12.0 dB Description Control source: input signal or MIDI Note On velocity Sensitivity Upward or downward frequency change Decay speed Delay time offset Feedback gain (plus values for normal-phase feedback, minus values for reverse-phase feedback) Low shelving filter frequency Low shelving filter gain EQ (peaking type) frequency EQ (peaking type) gain EQ (peaking type) bandwidth High shelving filter frequency High shelving filter gain *1. 6.0 ms-46.0 s (fs=44.1 kHz), 5.0 ms-42.3 s (fs=48 kHz) Appendices M7CL Owner's Manual 257