Yamaha M7CL M7cl V3 Owner's Manual - Page 62
HA/PATCH popup window ALL], INPUT PATCH button
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Making HA (Head Amp) settings [HA/PATCH popup window (8 ch)] Here you can make HA-related settings for a group of eight channels. 1 2 3 4 5 1 Channel select button This shows the icon, channel number, and channel name for the channel. When you press this button, that channel will be selected for operations, and the corresponding [SEL] key will light. B INPUT PATCH button This indicates the currently selected input port. You can press this button to access the INPUT PORT SELECT popup window, where you can select the input port for each channel. C +48V button This switches the phantom power on (red) or off (black) for the head amp assigned to this channel. D GAIN knob This indicates the gain of the head amp assigned to this channel. Use multifunction encoders 1-8 to adjust the value. The level meter located at the immediate right of the knob indicates the input level for the corresponding port. E ø (Phase) button This switches the head amp assigned to the channel between normal phase (black) and reverse phase (orange). [HA/PATCH popup window (ALL)] This window shows the head amp settings of all input channels. Here you can also adjust the head amp gain in groups of the selected eight channels. 134 2 1 Channel select button This indicates the channel number, the icon selected for that channel, and the channel name. When you press this button, that channel will be selected for operations, and the corresponding [SEL] key will light. B GAIN knob This indicates the gain of the head amp assigned to the channel. To adjust the value, press the knob to select it, and operate multifunction encoders 1-8. The indicator located at the immediate right of the knob indicates the presence or absence of a signal for the corresponding port. C +48V This indicates the phantom power on (red) or off (black) status for the head amp assigned to the channel. D ø (Phase) This indicates either normal phase (black) or reverse phase (orange) for the head amp assigned to the channel. 4 Access either the 1 ch or 8 ch HA/PATCH popup window. 5 Use the on-screen buttons or the multifunction encoders to edit the head amp gain, phase, and phantom power on/off settings. NOTE • The PAD will be internally switched on or off when the HA gain is adjusted between -14 dB and -13 dB. Keep in mind that noise may be generated if there is a difference between the Hot and Cold output impedance of the external device connected to the INPUT connector when using phantom power. • The GAIN knob, +48V button, and ø button are valid only for channels whose assigned input port is an INPUT jack, ST IN jacks (M7CL-32/48), OMNI IN jacks (M7CL-48ES), or a slot that is connected to an external head amp device (e.g., Yamaha AD8HR, SB168-ES). (For details on connecting external head amp devices → p. 190). 6 Perform the same operations for other input channels as desired. If you are viewing the 1 ch HA/PATCH popup window, you can also use the [SEL] keys to switch the channel for editing. If you are viewing the 8 ch HA/PATCH popup window, you can use the navigation keys to switch the channels being controlled in groups of eight channels. 7 When you're finished editing, press the "×" symbol in the upper right of the window. 62 M7CL Owner's Manual