Canon MultiPASS C560 Software Guide - Page 295

Chapter 6 s Remote Receive You select this option so that you can set the MultiPASS, from a telephone extension, to receive a fax if an incoming call is ringing on the MultiPASS. If you select this option, you must assign a remote identification number that signals the MultiPASS to receive the fax. s Remote Identification Number If the Remote Receive option is selected, you assign the identification number you will use to set the MultiPASS to receive a fax. s DRPD Switch Options You can select this option if you subscribe to the Distinctive Ring Pattern Detection (DRPD) service through your phone company. You then specify each ring pattern you have been assigned, with its associated action, fax ID, and fax number. When you select this option, the Receive mode is automatically set to receive both fax and telephone calls. s Ring Pattern If you subscribe to DRPD through your phone company, select the ring pattern assigned to each phone number by your phone company: Normal (single-ring), Double (double-ring), S-S-L (short-short-long ring), S-L-S (short-long-short ring), or Other. s Action If you subscribe to DRPD through your phone company, select the call type to be received for each selected ring pattern. Typically, you would specify telephone calls for one ring pattern and fax calls for the other ring pattern. However, if necessary, you can specify that a selected ring pattern switch between receiving telephone and fax calls. Utilities 6-18