D-Link DWS-3160-24TC DWS-3160 Series Web UI Reference Guide - Page 102

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide Forbidden Router Port This section is used to designate a range of ports as being not connected to multicast-enabled routers. This ensures that the forbidden router port will not propagate routing packets out. Dynamic Router Port Display router ports that have been dynamically configured. Ports Select the appropriate ports individually to include them in the Router Port configuration. Click the Select All button to select all the ports for configuration. Click the Clear All button to unselect all the ports for configuration. Click the Apply button to accept the changes made. Click the MLD Snooping > MLD Snooping Rate Limit Settings, as show below: Figure 7-57 MLD Snooping Rate Limit Settings window The fields that can be configured are described below: Parameter Description Port List Enter the Port List here. VID List Enter the VID List value here. Rate Limit (1-1000) Configure the rate limit of MLD control packet that the switch can process on a specific port/VLAN. The rate is specified in packet per second. The packet that exceeds the limited rate will be dropped. Tick the No Limit check box to lift the rate limit requirement. Click the Apply button to accept the changes made for each individual section. Click the Find button to locate a specific entry based on the information entered. Click the Edit button to re-configure the specific entry. MLD Snooping Static Group Settings This page used to configure the MLD snooping multicast group static members. To view the following window, click L2 Features > L2 Multicast Control > MLD Snooping > MLD Snooping Static Group Settings, as show below: 97