D-Link DWS-3160-24TC DWS-3160 Series Web UI Reference Guide - Page 471

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide NOTE: Only the Reset System option will enter the factory default parameters into the Switch's nonvolatile RAM, and then restart the Switch. All other options enter the factory defaults into the current configuration, but do not save this configuration. Reset System will return the Switch's configuration to the state it was when it left the factory. Reset gives the option of retaining the Switch's User Accounts and History Log while resetting all other configuration parameters to their factory defaults. If the Switch is reset using this window, and Save Changes is not executed, the Switch will return to the last saved configuration when rebooted. Figure 2-11 Reset System window The fields that can be configured are described below: Parameter Description Reset Selecting this option will factory reset the Switch but not the IP Address, User Accounts and the Banner. Reset Config Selecting this option will factory reset the Switch but not perform a Reboot. Reset System Selecting this option will factory reset the Switch and perform a Reboot. Click the Apply button to initiate the Reset action. Reboot System The following window is used to restart the Switch. Figure 2-12 Reboot System Window Selecting the Yes radio button will instruct the Switch to save the current configuration to non-volatile RAM before restarting the Switch. Selecting the No radio button instructs the Switch not to save the current configuration before restarting the Switch. All of the configuration information entered from the last time Save Changes was executed will be lost. Click the Reboot button to restart the Switch. 466