D-Link DWS-3160-24TC DWS-3160 Series Web UI Reference Guide - Page 269

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide Figure 11-87 CP-Client Status window Use the drop-down menu to select a CP to see the information of the clients connected to the CP. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. SNMP Trap Configuration This window is used to configure whether or not SNMP traps are sent from the Captive Portal and to specify captive portal events that will generate a trap. To view this window, click Security > Captive Portal (CP) > SNMP Trap Configuration as shown below: Figure 11-88 SNMP Trap Configuration window The fields that can be configured are described below: Parameter Description Client Authentication Use the drop-down menu to enable or disable the SNMP agent sending a trap when a Failure Traps client attempts to authenticate with a captive portal but is unsuccessful. Client Connection Traps Use the drop-down menu to enable or disable the SNMP agent sending a trap when a client authenticates with and connects to a captive portal. Client Database Full Traps Use the drop-down menu to enable or disable the SNMP agent sending a trap each time an entry cannot be added to the client database because it is full. Client Disconnection Use the drop-down menu to enable or disable the SNMP agent sending a trap when a Traps client disconnects from a captive portal. Click the Apply button to accept the changes made for each individual section. 264