D-Link DWS-3160-24TC DWS-3160 Series Web UI Reference Guide - Page 410
Manual Channel Plan, GHz 802.11 a/n / 2.4, GHz 802.11 b/g/n, Current Status, AP MAC Address, Location
View all D-Link DWS-3160-24TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 410 highlights
DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide • The channel is not valid for the radio mode. • The AP has been rebooted since the channel plan was computed and acquires a static channel that has been set statically via local database. • The channel has been set manually through the advanced page. • The auto-channel mode has been disabled in the profile for this AP. After clicking the Manual Channel Plan tab, the following page will appear: Figure 3-13 RF Management Manual Channel Plan window The fields that can be displayed are described below: Parameter Description 5 GHz (802.11 a/n) / 2.4 GHz (802.11 b/g/n) Current Status AP MAC Address Location Radio Current Channel New Channel The 5 GHz and 2.4 GHz radios use different channel plans, so the switch tracks the channel history separately for each radio. The channel information that displays is only for the selected radio. Display one of the following status: • None - The channel plan algorithm has not been manually run since the last switch reboot. • Algorithm In Progress - The channel plan algorithm is running. • Algorithm Complete - The channel plan algorithm has finished running. • Apply In Progress - The switch is applying the proposed channel plan and adjusting the channel on the APs listed in the table. • Apply Complete - The algorithm and channel adjustment are complete. The Ethernet address of the Unified Wireless Switch managed AP. If the MAC address of the AP is followed by an asterisk (*), it is managed by a peer switch. A location description for the AP, this is the value configured in the valid AP database (either locally or on the RADIUS server). Display the radio interface and configured mode of the radio, if the radio is disabled the radio mode will be displayed as Off instead of showing the configured mode. Display the current operating channel for the AP that the algorithm recommends for new channel assignments. Display the proposed operating channel for the AP. 405