D-Link DWS-3160-24TC DWS-3160 Series Web UI Reference Guide - Page 416

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide Address provisioned. New Backup IP Address Tick the check box and enter IP address of the backup switch that the AP to be provisioned. Profile ID Use the drop-down menu to select the profile ID to be used when provisioning. Click the Apply button to accept the changes made. Click the Delete button to remove the entry. Click the Provision the AP button to perform provisioning. Advanced Configuration Global This window is used to configure wireless advanced settings. To view this window, click Administration > Advanced Configuration > Global as shown below: Figure 3-22 Global General window The fields that can be configured are described below: Parameter Description Peer Group ID Client Roam Timeout (secs) Ad Hoc Client Status Timeout (hours) AP Failure Status Timeout (hours) MAC Authentication Mode Enter a peer group ID to configure wireless switches as peers. Peer switches share some information about APs and allow L3 roaming among them. Enter a time in second to determine how long to keep an entry in the Associated Client Status list after a client has disassociated. Enter a time in hour to determine how long to keep an entry in the Ad Hoc Client Status list. Enter a time in hour to determine how long to keep an entry in the AP Authentication Failure Status list. Select the global action to take on wireless clients in the white-list or black-list. white-list - Specify that any wireless clients with MAC addresses, specified in the Known Client database and not explicitly denied access, are granted access. If the MAC address is not in the database then the access to the client is denied. black-list - Select this option to specify that any wireless clients with MAC 411