D-Link DWS-3160-24TC DWS-3160 Series Web UI Reference Guide - Page 123
LLDP Port Settings, L2 Features > LLDP > LLDP > LLDP Port Settings, From Port / To Port
View all D-Link DWS-3160-24TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide LLDP Port Settings On this page the user can configure the LLDP port parameters. To view the following window, click L2 Features > LLDP > LLDP > LLDP Port Settings, as show below: Figure 7-90 LLDP Port Settings window The fields that can be configured are described below: Parameter Description From Port / To Port Use the drop-down menu to select the ports used for this configuration. Notification Use the drop-down menu to enable or disable the status of the LLDP notification. This function controls the SNMP trap however it cannot implement traps on SNMP when the notification is disabled. Admin Status This function controls the local LLDP agent and allows it to send and receive LLDP frames on the ports. This option contains TX, RX, TX And RX or Disabled. TX - the local LLDP agent can only transmit LLDP frames. RX - the local LLDP agent can only receive LLDP frames. TX And RX - the local LLDP agent can both transmit and receive LLDP frames. Disabled - the local LLDP agent can neither transmit nor receive LLDP frames. The default value is TX And RX. Subtype Use the drop-down menu to select the type of the IP address information will be sent. Action Use the drop-down menu to enable or disable the action field. Address Enter the IP address that will be sent. Click the Apply button to accept the changes made. NOTE: The IPv4 or IPv6 address entered here should be an existing LLDP management IP address. 118