D-Link DWS-3160-24TC DWS-3160 Series Web UI Reference Guide - Page 384

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide Figure 2-50 Detected Client Summary -Triangulation window The fields that can be displayed are described below: Parameter Description MAC Address MAC address of the client. AP Function Identifies whether the radio that detected the client is in sentry or non-sentry mode. • Non-Sentry - The radio that detected the client is not configured in sentry mode. This means the radio can accept connections from wireless clients and send and receive traffic. • Sentry - The radio that detected the client is configured in sentry mode. Networks that deploy sentry APs or radios can detect devices on the network quicker and perform more thorough security analysis. AP MAC Address MAC Address of the managed AP that detected the client. Radio Radio number to which the client is authenticated, which is either Radio 1 or Radio 2. RSSI (%) Received signal strength indicator in terms of percentage for the non-sentry AP. The range is from 0 to 100, where the maximum value is 100. A value of 0 indicates that the client is not detected. Signal (dBm) Received signal strength in dBm. The possible range is -127 to 127. However, realistically, this value is expected to range from -95 to -10. Noise (dBm) Noise reported on the channel by the non-sentry AP. The possible range is -127 to 127. Age Time since this AP detected the signal. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. After clicking the Roam History tab under the Detected Client Summary tab, the following page will appear: 379