D-Link DWS-3160-24TC DWS-3160 Series Web UI Reference Guide - Page 55

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide RMON Falling Alarm Trap Enable this option to use the RMON Falling Alarm Trap Feature. Click the Apply button to accept the changes made. Telnet Settings Users can configure Telnet Settings on the Switch. To view the following window, click Management > Telnet Settings, as show below: Figure 6-43 Telnet Settings window The fields that can be configured are described below: Parameter Description Telnet State Telnet configuration is Enabled by default. If you do not want to allow configuration of the system through Telnet choose Disabled. Port (1-65535) The TCP port number used for Telnet management of the Switch. The "well-known" TCP port for the Telnet protocol is 23. Click the Apply button to accept the changes made. Web Settings Users can configure the Web settings on the Switch. To view the following window, click Management > Web Settings, as show below: Figure 6-44 Web Settings window The fields that can be configured are described below: Parameter Description Web Status Web-based management is Enabled by default. If you choose to disable this by clicking Disabled, you will lose the ability to configure the system through the web interface as soon as these settings are applied. Port (1-65535) The TCP port number used for web-based management of the Switch. The "well-known" TCP port for the Web protocol is 80. Click the Apply button to accept the changes made. 50