D-Link DWS-3160-24TC DWS-3160 Series Web UI Reference Guide - Page 289
CFM Packet Counter, OAM > CFM > CFM Packet Counter
View all D-Link DWS-3160-24TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 289 highlights
DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide Figure 13-13 CFM Linktrace Settings Window The fields that can be configured are described below: Parameter Description MEP Name Select and enter the Maintenance End Point name used. MEP ID (1-8191) Select and enter the Maintenance End Point ID used. MD Name Select and enter the Maintenance Domain name used. MD Index Select and enter the Maintenance Domain index used. MA Name Select and enter the Maintenance Association name used. MA Index Select and enter the Maintenance Association index used. MAC Address Here the user can enter the destination MAC address. TTL (2-255) Link-trace message TTL value. The default value is 64. PDU Priority The 802.1p priority to be set in the transmitted LTM. If not specified, it uses the same priority as CCMs sent by the MA. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Click the Delete button to remove the specific entry based on the information entered. Click the Delete All button to remove all the entries listed. CFM Packet Counter This window is used to show the CFM packet's RX/TX counters. To view this window, click OAM > CFM > CFM Packet Counter, as shown below: 284