D-Link DWS-3160-24TC DWS-3160 Series Web UI Reference Guide - Page 288

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide Figure 13-12 CFM Loopback Settings Window The fields that can be configured are described below: Parameter Description MEP Name Select and enter the Maintenance End Point name used. MEP ID (1-8191) Select and enter the Maintenance End Point ID used. MD Name Select and enter the Maintenance Domain name used. MD Index Select and enter the Maintenance Domain index used. MA Name Select and enter the Maintenance Association name used. MA Index Select and enter the Maintenance Association index used. MAC Address Enter the destination MAC address used here. LBMs Number (165535) Number of LBMs to be sent. The default value is 4. LBM Payload Length (0-1500) The payload length of LBM to be sent. The default is 0. LBM Payload Pattern An arbitrary amount of data to be included in a Data TLV, along with an indication whether the Data TLV is to be included. LBMs Priority The 802.1p priority to be set in the transmitted LBMs. If not specified, it uses the same priority as CCMs and LTMs sent by the MA. Click the Apply button to accept the changes made. CFM Linktrace Settings This window is used to issue a CFM link track message, display or delete the link trace responses. To view this window, click OAM > CFM > CFM Linktrace Settings, as shown below: 283