D-Link DWS-3160-24TC DWS-3160 Series Web UI Reference Guide - Page 197

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide Figure 10-65 Egress ACL Flow Meter Configuration window The fields that can be configured are described below: Parameter Description Profile ID (1-4) Profile Name Access ID (1-128) Mode Action Here the user can enter the Profile ID for the flow meter. Here the user can enter the Profile Name for the flow meter. Here the user can enter the Access ID for the flow meter. Rate - Specify the rate for single rate two color mode. Rate - Specify the committed bandwidth in Kbps for the flow. Burst Size - Specify the burst size for the single rate two color mode. The unit is in kilobyte. Rate Exceeded - Specify the action for packets that exceed the committed rate in single rate two color mode. The action can be specified as one of the following: Drop Packet - Drop the packet immediately. Remark DSCP - Mark the packet with a specified DSCP. The packet is set to drop for packets with a high precedence. trTCM - Specify the "two-rate three-color mode." CIR - Specify the Committed information Rate. The unit is Kbps. CIR should always be equal or less than PIR. PIR - Specify the Peak information Rate. The unit is Kbps. PIR should always be equal to or greater than CIR. CBS - Specify the Committed Burst Size. The unit is in kilobyte. PBS - Specify the Peak Burst Size. The unit is in kilobyte. srTCM - Specify the "single-rate three-color mode". CIR - Specify the Committed Information Rate. The unit is in kilobyte. CBS - Specify the Committed Burst Size. The unit is in kilobyte. EBS - Specify the Excess Burst Size. The unit is in kilobyte. Conform - This field denotes the green packet flow. Green packet flows may have their DSCP field rewritten to a value stated in this field. Users may also choose to count green packets by using counter parameter. Replace DSCP - Packets that are in the green flow may have their DSCP field rewritten 192