D-Link DWS-3160-24TC DWS-3160 Series Web UI Reference Guide - Page 146

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide Click the Apply button to accept the changes made. DSCP Map Settings The mapping of DSCP to queue will be used to determine the priority of the packet (which will be then used to determine the scheduling queue) when the port is in DSCP trust state. The DSCP-to-DSCP mapping is used in the swap of DSCP of the packet when the packet is ingresses to the port. The remaining processing of the packet will base on the new DSCP. By default, the DSCP is mapped to the same DSCP. To view the following window, click QoS > DSCP > DSCP Map Settings, as show below: Figure 9-8 DSCP Map Settings - DSCP Priority window To view the following window, click QoS > DSCP > DSCP Map Settings and select DSCP DSCP from the DSCP Map drop-down menu, as show below: Figure 9-9 DSCP Map Settings - DSCP DSCP window The fields that can be configured are described below: Parameter Description From Port / To Port Use the drop-down menu to select a range of port to configure. 141