D-Link DWS-3160-24TC DWS-3160 Series Web UI Reference Guide - Page 142

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide Effective TX If a RADIUS server has assigned the TX bandwidth, then it will be the effective TX bandwidth. The authentication with the RADIUS sever can be per port or per user. For per user authentication, there may be multiple TX bandwidths assigned if there are multiple users attached to this specific port. The final TX bandwidth will be the largest one among these multiple TX bandwidths. Click the Apply button to accept the changes made. Queue Bandwidth Control Settings To view this window, click QoS > Bandwidth Control > Queue Bandwidth Control Settings, as shown below. To view the following window, click QoS > Bandwidth Control > Queue Bandwidth Control Settings, as show below: Figure 9-5 Queue Bandwidth Control Settings window The fields that can be configured are described below: Parameter Description From Port / To Port Use the drop-down menu to select the port range to use for this configuration. From Queue / To Queue Use the drop-down menu to select the queue range to use for this configuration. Min Rate (64-1024000) Specify the packet limit, in Kbps that the ports are allowed to receive. Tick the No limit check box to have unlimited rate of packets received by the specified queue. Max Rate (64-1024000) Enter the maximum rate for the queue. For no limit select the No Limit option. Click the Apply button to accept the changes made. NOTE: The minimum granularity of queue bandwidth control is 64Kbit/sec. The system will adjust the number to the multiple of 64 automatically. 137