D-Link DWS-3160-24TC DWS-3160 Series Web UI Reference Guide - Page 76
QinQ Settings, VLAN Translation Settings, L2 Features > QinQ > QinQ Settings, QinQ State
View all D-Link DWS-3160-24TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide QinQ Settings This window is used to configure the Q-in-Q parameters. To view the following window, click L2 Features > QinQ > QinQ Settings, as show below: Figure 7-26 QinQ Settings Window The fields that can be configured are described below: Parameter Description QinQ State Click to enable or disable the Q-in-Q state. Inner TPID Enter an Inner TPID in SP-VLAN tag here. From Port / To Port Use the drop-down menus to select a range of ports to use in the configuration. Role Port role in Q-in-Q mode, it can be UNI port or NNI port Missdrop This option enables or disables C-VLAN based SP-VLAN assignment miss drop. If Missdrop is enabled, the packet that does not match any assignment rule in the Q-in-Q profile will be dropped. If disabled, then the packet will be forwarded and will be assigned to the PVID of the received port. Outer TPID Enter an Outer TPID in SP-VLAN tag here. Add Inner Tag Specifies that an Inner Tag will be added to the entry. By default the Disabled option is selected. Click the Apply button to accept the changes made for each individual section. VLAN Translation Settings This window is used to add translation relationship between C-VLAN and SP-VLAN. On ingress at UNI port, the CVLAN tagged packets will be translated to SP-VLAN tagged packets by adding or replacing according the 71