D-Link DWS-3160-24TC DWS-3160 Series Web UI Reference Guide - Page 275

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide This option decides whether the DHCP Relay will process the DHCP option 60 or not To view this window, click Network Application > DHCP > DHCP Relay > DHCP Relay Option 60 Settings as shown below: Figure 12-6 DHCP Relay Option 60 Settings window The fields that can be configured are described below: Parameter Description String Enter the DHCP Relay Option 60 String value. Different strings can be specified for the same relay server, and the same string can be specified with multiple relay servers. The system will relay the packet to all the matching servers. Server IP Address Here the user can enter the DHCP Relay Option 60 Server IP address. Match Type Here the user can enter the DHCP Relay Option 60 Match Type value. Exact Match - The option 60 string in the packet must full match with the specified string. Partial Match - The option 60 string in the packet only need partial match with the specified string. IP Address Enter the DHCP Relay Option 60 IP address. String Enter the DHCP Relay Option 60 String value. Click the Add button to add a new entry based on the information entered. Click the Find button to locate a specific entry based on the information entered. Click the Delete button to remove the specific entry based on the information entered. Click the Show All button to display all the existing entries. Click the Delete All button to remove all the entries listed. DHCP Relay Option 61 Settings This window is used to configure, add and delete DHCP relay option 61 parameters. To view this window, click Network Application > DHCP > DHCP Relay > DHCP Relay Option 61 Settings as shown below: 270