D-Link DWS-3160-24TC DWS-3160 Series Web UI Reference Guide - Page 281

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide Chapter 9 CFM Ethernet OAM Cable Diagnostics OAM CFM CFM Settings This window is used to configure the CFM parameters. To view this window, click OAM > CFM > CFM Settings, as shown below: Figure 13-1 CFM Settings Window The fields that can be configured are described below: Parameter Description CFM State Here the user can enable or disable the CFM feature. All MPs Reply LTRs Here the user can enable or disable all MPs to reply LTRs. MD Here the user can enter the maintenance domain name. MD Index Specifies the maintenance domain index used. Level Here the user can select the maintenance domain level. MIP This is the control creations of MIPs. None - Don't create MIPs. This is the default value. Auto - MIPs can always be created on any ports in this MD, if that port is not configured with a MEP of this MD. For the intermediate switch in a MA, the setting must be auto in order for the MIPs to be created on this device. Explicit - MIPs can be created on any ports in this MD, only if the next existent lower level has a MEP configured on that port, and that port is not configured with a MEP of this MD. SenderID TLV This is the control transmission of the SenderID TLV. None - Don't transmit sender ID TLV. This is the default value. Chassis - Transmit sender ID TLV with chassis ID information. Manage - Transmit sender ID TLV with managed address information. Chassis Manage - Transmit sender ID TLV with chassis ID information and manage address information. Click the Apply button to accept the changes made for each individual section. 276