D-Link DWS-3160-24TC DWS-3160 Series Web UI Reference Guide - Page 94

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide Click the Clear All button to unselect all the ports for configuration. Click the Apply button to accept the changes made. Click the IGMP Snooping > IGMP Snooping Rate Limit Settings, as show below: Figure 7-45 IGMP Snooping Rate Limit Settings window The fields that can be configured are described below: Parameter Description Port List Click the radio button and enter the port list used for this configuration. VID List Click the radio button and enter the VID list used for this configuration. Rate Limit (1-1000) Enter the IGMP snooping rate limit used. Tick the No Limit check box to ignore the rate limit. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Click the Edit button to re-configure the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. IGMP Snooping Static Group Settings Users can view the Switch's IGMP Snooping Group Table. IGMP Snooping allows the Switch to read the Multicast Group IP address and the corresponding MAC address from IGMP packets that pass through the Switch. To view the following window, click L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Static Group Settings, as show below: Figure 7-46 IGMP Snooping Static Group Settings window 89