D-Link DWS-3160-24TC DWS-3160 Series Web UI Reference Guide - Page 365

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide Figure 2-30 AP RF Scan Status - Detail window The fields that can be displayed are described below: Parameter Description MAC address SSID Channel Status Initial Status Transmit Rate WIDS Rogue AP Mitigation Age Discovered Age BSSID The Ethernet MAC address of the detected AP. This could be a physical radio interface or VAP MAC. For D-Link APs this is always a VAP MAC address. Service Set ID of the network, which is broadcast in the detected beacon frame. Transmit channel of the AP. Indicate the managed status of the AP, whether this is a valid AP known to the switch or a Rogue on the network. The valid values are: • Managed - The neighbor AP is managed by the wireless system. • Standalone - The AP is managed in standalone mode and configured as a valid AP entry (local or RADIUS). • Rogue - The AP is classified as a threat by one of the threat detection algorithms. • Unknown - The AP is detected in the network but is not classified as a threat by the threat detection algorithms. If the AP is not rogue, the initial status is equal to Status (Managed, Standalone, or Unknown). For rogue APs, the initial status is the classification prior to this AP becoming rogue. Display the rate at which the AP is currently transmitting data. Status indicating whether rogue AP mitigation is in progress for this AP. If mitigation is not in progress then this field displays the reason, which can be one of the following: • Not Required (AP is not rogue) • Already mitigating too many APs. • AP Is operating on an illegal channel. • AP is spoofing valid managed AP MAC address. • AP is Ad hoc. Time since this AP was last detected in an RF scan. Time since this AP was first detected in an RF scan. Basic Service Set Identifier advertised by the AP in the beacon frames. 360