D-Link DWS-3160-24TC DWS-3160 Series Web UI Reference Guide - Page 408

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Description Channel Plan The 2.4 GHz (802.11b/g/n) and 5 GHz (802.11 a/n) frequencies use different channel plans. Click the radio button to select the frequency. Channel Plan Mode Click to select channel assignment mode. The default is Manual. Fixed Time - Select this to specify the time for the channel plan and channel assignment. Manual - Select this to manually run the channel plan algorithm and apply the channel plan to the APs. Interval - Select this to have the switch periodically calculating and applying the channel plan. Channel Plan History Depth (0-10) Enter the number of channel plan history iterations. The default value is 5. The channel plan history lists the channels the switch assigns each of the APs it manages after a channel plan is applied. Entries are added to the history regardless of interval, time, or channel plan mode. The number you specify in this field controls the number of iterations of the channel assignment. NOTE: The APs changed in previous iterations cannot be assigned new channels in the next iteration. This history prevents the same APs from being changed time after time. The default value is 5. Channel Plan Interval (6-24 Hours) If Interval is selected in Channel Plan Mode, enter an interval, between 6 and 24 hours, at which the channel plan calculation and assignment occurs. The default value is 6. Channel Plan Fixed Time (hh:mm) If Fixed Time is selected in Channel Plan Mode, enter a fix time at which the channel plan calculation and assignment occurs. The channel plan calculation will occur once every 24 hours at the entered time. Power Adjustment Mode Click Manual or Interval to manually or periodically adjust the power of the AP radio frequency transmission. The default is Manual. • Manual - The proposed power adjustments are run manually from the Manual Power Adjustments page. • Interval - The switch periodically calculates the power adjustments and applies the power for all APs. The interval period begins when you click Submit. Power Adjustment Interval (15-1440 minutes) Enter the interval to determine how often the switch runs the power adjustment algorithm. The value takes effect when Interval is selected in Power Adjustment Mode. The default value is 15. Click the Apply button to accept the changes made for each individual section. After clicking the Channel Plan History tab, the following page will appear: 403